Welcome to our Mining equipment manufacturing base, Contact Us


The solvent extraction of copper and zinc from the bioleaching solutions of low-grade sulfide ores with LIX984 and D2EHPA was investigated. The influences of extractant content, aqueous pH value, phase ratio and equilibration time on metals extraction were studied. The results show that LIX984 has a higher selectivity for copper than for iron, zinc and other …


The ratio of organic to aqueous (O/A) in solvent extraction process plays important role for the extraction of metals from solutions. Therefore, the studies were made by varying O/A ratio for the extraction of copper from the aqueous feed solution containing 0.92 g/L Cu using 5% LIX 84 diluted in kerosene.The results showed the extraction of copper increased with …


Zinc leaching experiments. The leaching tests were conducted in a stirred-tank reactor by H 2 SO 4 and de-ionized water as leaching solution with agitation rate of 500 rpm, pH of less than 2 and particle size (d 80) of 300 µm 5.In each test, the amount of 100 g ore was added into the reactor and temperature was set at the desired temperature, then the leaching …


The synergistic solvent extraction of nickel and cobalt by pyridinecarboxylate esters (2‐, 3‐ or 4‐C5H4N.CO.OR) in admixture with 3‐bromo‐ or 3‐nitro‐derivatives …


Jan 02, 2012· : Solvent Extraction and Separation of Copper and Zinc from a Pickling Solution . During extraction of metals using acidic extractants, H + ions are released causing the decrease in pH which subse-quently lowers extraction of metals in several instances. So the extraction process is greatly affected by pH. The effect of


Concentration of the copper(II) sulphate solution by solvent extraction. The very dilute solution is brought into contact with a relatively small amount of an organic solvent containing something which will bind with copper(II) ions so that …


J. Phys. Chem. All Publications/Website. OR SEARCH CITATIONS


Separation of zinc(II) and copper(II) ions from aqueous solutions by synergistic extraction and transport through polymer inclusion membranes (PIMs) has been investigated. A mixture of trioctylphosphine oxide (TOPO) and trioctymethylammonium chloride (Aliquat 336) was used as a selective extractant as well as an ion carrier in polymer membranes.


(2010). Solvent Extraction of Iron(III) From Chloride Solutions in the Presence of Copper(II) and Zinc(II) Using Hydrophobic Pyridyl Ketoximes. Separation Science and Technology: Vol. 46, No. 1, pp. 87-93.


applied to solvent extraction processes. Any methods disclosed for the reduction of metal cations to reduce and cement metal cations onto an added solid metal have been applied before carrying out the solvent ex­ traction. According to Canadian Patent 1 250 210, a solution containing iron and zinc is treated in two stages


An integrated hydrometallurgical process was used for the zinc leaching and purification from a zinc ore containing 9.75 wt% zinc. The zinc minerals in the ore were hemimorphite, willemite, and ...


The extraction characteristics of 1,5-diphenylcarbazone and its complexes with the bivalent metal ions copper(II) and zinc(II) in an isobutyl methyl ketone-water system have been studied and the extraction curves of these metal complexes have also been obtained. The copper(II) complex is extracted from a more acidi


zinc, copper, lead, iron, in the acidic solution. These compounds can form complexes with metals according to ion-pair and solvating mechanisms [5,6]. The aim of this work was to investigate the extraction properties of the pyridine derivatives towards Zn(II). The most important stage was to determine the effect of the different parameters on the


Solvent extraction of zinc(II) from ammonia leaching solution by LIX 54-100, LIX 84 I… 205 Results and discussion Influence of ammonia concentration on zinc(II) extraction The effect of ammonia concentration on zinc(II) extraction was investigated for selected extractants (LIX 54-100, LIX 84 I and TOA) diluted in the aliphatic diluent


Indium recovery from acidic aqueous solutions by solvent extraction with D2EHPA: a statistical approach to the experimental design. M.C.B.Fortes I; A.H.Martins II; J.S.Benedetto I. I Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), Rua Prof. Mario Werneck, S/N - Cx. P. 941, CEP 30.161-970, Fax: (31) 3499-3399, Cidade Universitária, Pampulha, Belo Horizonte - …


Solvent extraction separation and recovery of copper, nickel and zinc from printed circuit board by Cyanex 272 M. F. Bari*, M. N. Begum, S. B. Jamaludin and K. Hussin


The recovery of valuable materials from waste industrial solutions is an important component of the environmentally benign technologies. Copper, iron and zinc often coexist in leach chloride solutions and various waste industrial effluents. The selectivity removal of these metals can be successfully accomplished applying a solvent extraction process.


Get more information

Copper Chemistry -

Solvent Extraction / Electrowinning is the most dominant leaching process used today in the recovery of copper from chemical solutions. As the name suggests the method involves two major stages: Solvent Extraction- the process by which copper ions are leached or otherwise extracted from the raw ore using chemical agents.


Solvent extraction studies of copper and zinc have been carried out using Versatic 10 acid and Cyanex 272 separately from a model brass pickle liquor. Various parameters for the extraction and separation of copper and zinc such as effect of pH, extractant concentration, phase ratio etc. have been optimized. It was observed that copper was ...


The extraction of copper(II) and zinc(II) from acidic chloride solutions with protonated Kelex 100 (HL) was studied and the extraction isotherms were determined for systems containing individual metal ions and their mixtures. A chemical model was proposed and verified. It considers the coextraction of the following species: MCl4(H2L)2, MCl4(H2L)2·HCl, MCl3(H2L), ML2, and …


Solvent extraction studies of copper and zinc have been carried out using Versatic 10 acid and Cyanex 272 separately from a model brass pickle liquor. Various parameters for the extraction and separation of copper and zinc such …


Acidic nickel-bearing solution containing iron, cobalt, manganese, zinc and copper was processed through a solvent extraction and precipitation technique to obtain a pure nickel sulphate solution. Iron was extracted using 0.2 M Cyanex-272 (partially neutralised) as the extractant. Stripping of iron from the loaded organic has also been studied.


Solvent extraction tests found that it is possible to achieve a metal extraction rate of lead, manganese, aluminum, iron, zinc and copper higher than 92% using LIX 26. Several solvent extraction works have been developed to recover metals from WEEE (Dorella and Mansur, 2007 Dorella, G., and Mansur, M. B., A study of the separation of cobalt ...


Journal of Hazardous Materials B120 (2005) 113–118 Solvent extraction applied to the recovery of heavy metals from galvanic sludge J.E. Silvaa,∗, A.P. Paivab, D. Soaresa, A. Labrinchac, F. Castroa a Mechanical Engineering Department, University of Minho, 4800-058 Guimar˜ aes, Portugal b Department of Chemistry and Biochemistry, Centre of Chemistry and …


The extraction of zinc and the selectivity between zinc and cobalt were investigated in solutions containing different chloride concentration. Several solvent extraction agents were tested, such as TBP (tri-butylphosphate), CYANEX 923 with TOPO as an active component (tri-octylphosphine oxide) as well as - and anionic extractants.


Methods for removing a number of metals from aqueous solution by solvent extraction are known to the art. U.S. Pat. No. 4,272,492, issued June 9, 1981 to Jensen, for "Selective Extraction And Recovery Of Copper" discloses a method for recovering copper from an acidic chloride solution with a solvent extraction agent, which requires stripping ...


Iron (III) is the main impurity in the leaching solution, and it can be extracted with copper within the equilibrium pH range of 1.72–1.96. The separation factor of Cu/Fe (β = D Cu /D Fe) is an important factor to evaluate the extractant .The β Cu/Fe of LK-C2 was below 45.00 within the equilibrium pH range of 0.20–0.97. It increased with the increasing of equilibrium pH …


The extraction of zinc by the XI-51 solvent should become more pronounced as the concentration of zinc builds in the leaching circuit. Conclusions Solvent extraction using a 3-vol-pct XI-51 solvent was used to extract 94 pct of …


A study has been carried out on the use of solvent extraction to remove copper from concentrated zinc sulfate leach solution. In a series of experiments using a plant leach solution containing 2 g/l Cu, 2 g/l Fe, 173 g/l Zn, 7.9 g/l H 2 SO 4, 250 mg/l Cd, 15 mg/l Co and LIX 622 in SX-1, up to 97–98% of the copper present in the zinc sulfate leach solution was extracted with …